|
Replacement SPL/SRL Heater Valve To Heater Core Hose
|
| The short curved hose that connects the heater valve to
the heater core may be replaced using a Gates 18821 pre-formed
hose. It does require
cutting some of the hose off on either side of the preformed bends, but
the bend shape is almost exactly the same as the Nissan supplied hose.
The inside diameter of the Gates hose is a snug, but nice, fit to the
brass hose fittings on the heater valve and the heater core. Once
installed the hose appears to have been made for this application. |
|
|
