|INTERIOR REAR PANEL
Stitching out the sample on my Toyota embroidery machine. Yup, Toyota. What you see here is the base, or underlay stitching to raise the finished design and give it body. These stitches are often left off of commercial designs because most commercial embroiderers (and customers) are cost conscious and don't want to pay for what they don't see. I don't care about stitch count for my own use and use underlay to control fabric movement and improve appearance.
|This design is 15" wide, and is intended to be
stitched onto the interior panel at the rear of the shelf. I
intend to make the stitch instructions available for free download in
1500, 1600, and of course 2000 versions. If you have suggestions
or another option I will modify accordingly.
I am also interested in any ideas you may have for the rear panel. I am no artist, and not blessed with an imagination, so if you have an idea I will consider creating a design for others to see and possibly use.
Because these designs are too large for home embroidery machines, they are available in commercial machine format only. These files are in ZIP format.
If you do not have software to unpack them you can download a program called Ultimate ZIP. This is listed as freeware. There is a donation link on their page. I would encourage you to send them a few bucks if you choose to keep and use their software.
I have had requests for application to other materials. The underlay will work with carpet if a topping such as Aquafilm is used to hold down the knap. Other applications do not require the amount of underlay in these designs. If you need this design for application on vinyl CONTACT ME FIRST. Some embroidery files will cut vinyl or leather if not properly prepared for these materials.